Laser scanner · Point clouds · Scan to BIM
3D scanning, point clouds and BIM
Buildings, captured point by point.
A laser scanner records millions of measured points in a few minutes. The point cloud captures a structure exactly as it is, with its defects and irregularities.
It is the most reliable basis for surveying an existing building, inspecting construction or producing a digital model.
What is a point cloud?
A terrestrial laser scanner emits a beam that sweeps its surroundings and measures, for every point it hits, its distance and direction. Set up successively at several stations, it covers an entire building or site.
The different stations are registered and aligned in a single coordinate system to form one point cloud, often colourised using photographs. Every point can be measured: distances, levels, verticality, flatness.
From the point cloud, plans, elevations and sections or a 3D digital model are produced. It is called Scan to BIM when that model is structured into objects (walls, slabs, columns) usable in BIM software.
Applications
- 01
Measured building surveys
Floor plans, elevations and sections of existing buildings.
- 02
Scan to BIM
Digital model of existing conditions for renovation, extension or facility management.
- 03
Construction inspection
Comparing the built structure with the design: levels, verticality, flatness.
- 04
Construction monitoring
Successive scans to document the progress of the works.
- 05
Heritage
Precise digital archiving of historic buildings and sites.
- 06
Industrial sites
Survey of complex installations before modification or extension.
Methodology
- Step 01
Preparation
Defining the areas, the expected level of detail and the deliverables.
- Step 02
Scanning
Scans from several stations covering all relevant surfaces.
- Step 03
Registration
Assembling the stations and georeferencing them using measured points.
- Step 04
Processing
Cleaning, colourising and checking the point cloud.
- Step 05
Modelling
Producing plans, sections, elevations or the digital model.
Deliverables
- Point cloudE57, LAS or native formats depending on the software used.
- Plans, elevations and sectionsDWG and PDF.
- Digital modelIFC or native format, according to the agreed level of detail.
- Inspection reportDeviations between the structure and the design.
Technologies
- 3D laser scannerCapture of millions of measured points.
- Total stationRegistration and check points.
- GNSS RTKGeoreferencing the point cloud.
- Processing and modelling softwareRegistration, cleaning and BIM modelling.
Project types
For the project owner
A faithful record of existing conditions
The cloud captures everything; measurements that were not planned can be taken afterwards.
Fewer return visits to site
A single scanning campaign feeds plans, sections and the model.
Decisions based on exact data
Design, renovation and inspection rely on the actual structure.
Technical terms
- Point cloud
- A set of points measured in 3D describing the surfaces of an object or site.
- Station
- The scanner position during a capture; a survey includes several.
- Registration
- Assembling the different stations in a single reference frame.
- BIM
- Building Information Modeling: a digital model of a structure enriched with information.
- Scan to BIM
- Producing a BIM model from a point cloud of existing conditions.
- IFC
- An open format for exchanging BIM models between software applications.
Frequently asked questions
What is the difference between a 3D scan and a conventional topographic survey?
A conventional survey measures points chosen by the operator. A scanner records all visible surfaces; any measurement can then be extracted from the cloud.
Is 3D scanning suitable for a building under construction?
Yes. It is used to check the geometry of the structure during construction and to document progress before elements are covered up.
What does a Scan to BIM model contain?
The building elements modelled as objects (walls, slabs, columns, openings) to a level of detail agreed in advance with the project owner.