Technologies
Every assignment combines several measurement techniques. The right tool depends on the required accuracy, the size of the site, its access and the timeline.
GNSS RTK
A GNSS receiver computes its position from satellite constellations (GPS, Galileo, GLONASS, BeiDou). In RTK mode, corrections transmitted in real time by a reference station deliver centimetre-level accuracy in the field.
Uses
- Large-area surveys
- Ground control points for photogrammetry
- Setting out in open areas
- Boundary surveys and tie-in
Good to know
It needs a clear sky: under trees, near buildings or in trenches, the total station takes over.
Related services TopographySetting out and construction monitoringDrone and photogrammetryBoundaries and landRoads and utilities3D scanning and BIMEnergy and major projectsEarthwork volumes
Total station
A total station measures horizontal and vertical angles as well as distances. It computes the position of sighted points from a known station. Robotic models automatically track the prism.
Uses
- Detail surveys
- Setting out and inspection of structures
- Areas obstructed for GNSS
- Precision control networks
Good to know
It requires a direct line of sight between the instrument and the measured point.
Related services TopographySetting out and construction monitoringBoundaries and landRoads and utilities3D scanning and BIMEnergy and major projectsEarthwork volumes
Level
A level measures height differences by horizontal sighting onto a staff. It is the reference instrument for determining gradients and levels with the greatest precision.
Uses
- Gravity networks
- Slabs and floors
- Levelling benchmarks
- Settlement monitoring
Good to know
It only gives elevation; horizontal position is measured by other means.
Related services TopographySetting out and construction monitoringRoads and utilities
Photogrammetry drone
A drone takes high-overlap photographs following an automatic flight plan. Photogrammetric processing derives an orthophoto, a point cloud and elevation models from them.
Uses
- Orthophoto maps
- DSM and DTM
- Volume calculations
- Construction monitoring
Good to know
It only measures what is visible and remains subject to flight regulations.
Related services TopographyDrone and photogrammetryRoads and utilitiesEnergy and major projectsMapping and GISEarthwork volumes
LiDAR
LiDAR measures distances using laser pulses. Mounted on a drone or aircraft, it records several returns per pulse, allowing it to reach the ground through some vegetation.
Uses
- Wooded terrain
- Power line and road corridors
- High-density DTM
Good to know
A heavier solution than photogrammetry, reserved for cases where it offers a real advantage.
Related services Drone and photogrammetry
3D laser scanner
A terrestrial laser scanner sweeps its surroundings and records millions of points in a few minutes from each station. The registered stations form a complete point cloud.
Uses
- Measured building surveys
- Scan to BIM
- Construction inspection
- Heritage
Good to know
It captures surfaces visible from its positions; coverage must be planned in advance.
Related services 3D scanning and BIM
Processing and modelling
Field observations are computed, checked and then processed in surveying, CAD, photogrammetry, point cloud processing and GIS software.
Uses
- Computation and adjustment
- Plans and profiles
- 3D models and BIM models
- Geographic databases
Good to know
The quality of a deliverable depends as much on quality control as on the tool.
Related services Drone and photogrammetry3D scanning and BIMMapping and GIS
Coordinate systems
In Morocco, official plans are generally expressed in the Lambert projections, while GNSS works in the global WGS84 system. Tie-in and coordinate transformations ensure that all data overlays correctly.
Uses
- Survey tie-in
- Land files
- GIS integration
- Data exchange between stakeholders
Good to know
A wrong coordinate system can shift a project by several tens of metres: the reference frame must be fixed from the outset.
Related services Boundaries and landMapping and GIS